Click image to view full size image
The fixed type vacuum emulsifying homogenizer mixer work principle as follow: First, the product raw materials are heated and stirred in the water pot and oil pot for pre-mixing reaction, and then they are sucked into the vacuum emulsification pot by the vacuum pump through the pipeline. Through stirring, homogenization and heating in the emulsification pot, the emulsification pot is in a vacuum state, and the product. The bubbles generated during the mixing and homogenization process are vacuumed away in time, thereby producing glossy and delicate products.
| Capacity | Homogenizer | Stirrer | Dimension (mm) | Limit Vacuum | ||||
| kw | r/min | kw | r/min | Length | Width | Height | Mpa | |
| 50L | 3-5.5 | 0-2890 | 1.1 | 0-63 | 2600 | 2250 | 1950 | -0.09 |
| 100L | 4-7.5 | 0-2890 | 1.5 | 0-63 | 2750 | 2380 | 2100 | -0.09 |
| 200L | 5.5-11 | 0-2890 | 2.2 | 0-63 | 2750 | 2750 | 2350 | -0.09 |
| 300L | 7.5-11 | 0-2890 | 2.2 | 0-63 | 2900 | 2850 | 2450 | -0.09 |
| 500L | 11 | 0-2890 | 4 | 0-63 | 3650 | 3300 | 2850 | -0.09 |
| 1000L | 15 | 0-2890 | 5.5 | 0-63 | 4200 | 3650 | 3300 | -0.09 |
| 2000L | 15 | 0-2890 | 7.5 | 0-63 | 4850 | 4300 | 3800 | -0.09 |
| In case of nonconformity of the data in the table due to technical improvement or customization, the real objects shall prevail. | ||||||||
Frame-type wall-scraping type stirring to prevent the product from sticking to the pot wall. One-way stirring, two-way stirring, and spiral stirring.
Both mixing and homogenization adopt frequency conversion speed regulation to meet the requirements of different production processes.
The homogenizer accelerates the dissolution and emulsification of materials, especially difficult-to-dissolve materials, saving energy consumption and shortening production time.
The fixed vacuum emulsifying mixer machine all parts that come into contact with the product are made of stainless steel 316L, and the inside and outside of the pot are mirror-polished, complying with hygienic standards.
Vacuum deaeration, the entire production process is completed in a vacuum aseptic state, extending the shelf life of the product. Use vacuum suction, especially for powder materials, to avoid dust pollution.
The fixed vacuum emulsifying machine is mainly composed of pretreatment pots (water pot and oil pot), emulsification mixing pot, vacuum system, mixing, homogenizing, heating system, temperature control system, cooling, electrical control system, operating platform, etc. After the raw materials in the water pot and oil pot are fully dissolved, they are vacuum-suctioned into the emulsifying pot for mixing, homogenization, and emulsification to make high-quality finished products.
http://www.domachinery.com/